1, check the automated assembly line is abnormal wear or damage to the situation.

  2, check the bottom of the conveyor belt hanging in a certain normal position.

  3, if the use of automated pipeline tension adjustment device, check the tension is excessive, must not exceed the strength of the conveyor belt.

  4, check the gear and conveyor belt between the fitting of foreign matter, must be clean.

  5, check all the support roller can be smooth rotation.

  6, check whether the gear over-wear phenomenon.

  7, check all lubrication parts are normal.

  8, check the conveyor system all need to clean the site.

  9, check all the support rails and side guide device whether there is excessive or abnormal wear conditions.

10, check the passport axis, and the conveyor belt is a complete combination.