Conveyors are also called conveyor lines, conveyor lines and pipelines. They are widely used in various industries in our daily lives. Today, we talk about conveyor belt layout guidelines.

       When the conveyor line has been selected, it is necessary to study its layout requirements. The overall layout of the conveyor belt can be divided into two types of indoor and corridor.

Corridor

        Corridor can be divided into closed, semi-enclosed and open-air three.

        Single conveyor belt, mainly through the side width of not less than 1.2 meters, non-main access side of the net width of not less than 0.7 meters.

        Double conveyor belt, mainly through the side width of not less than 1.0 meters, non-pass side of the net width of not less than 0.7 meters.

       Ground clearance corridor clearance height of not less than 2.2 meters, the underground corridor clearance height of not less than 2.5 meters, open-air corridor is in accordance with the above provisions, both sides of the fence is higher than 1 meter.

2. Indoor

       When equipped with lifting equipment, the indoor height of not less than 3 meters, lifting the I-beam to the maximum height after the equipment, although the difference is different, but should not be less than 0.3 to 0.5 meters of space distance.

       The minimum clearance between the nose of the nose and the tail of the roll and the floor should be greater than 200 mm.